超声波清洗机是一种利用高频振动波对物体进行清洁的设备。由于其高效、环保、清洁等特点,被广泛应用于各种领域。然而,当超声波清洗机出现故障时,可能会影响正常的生产和工作。本文将详细解析超声波清洗机常见的故障及应对与维修方法。
一、超声波清洗机常见故障
1. 清洗效果不佳:超声波清洗机的清洗效果不佳可能是由多种原因导致的。首先可能是由于清洗液温度过低或过高,清洗时间过短或过长,以及清洗液污染等问题。此外,换能器功率、频率设置不合适,以及清洗槽振动剧烈等也会导致清洗效果不佳。
2. 机器噪音大:超声波清洗机在工作过程中产生的噪音可能来自于换能器、振动板、风扇等多个部位。当出现这种故障时,需要检查这些部件是否正常工作,有无松动或损坏。
3. 无法启动或工作中断:这种故障可能是由于电源、控制电路、保险丝、热保护器等出现问题导致的。需要检查各个部件是否正常工作,及时更换损坏的部件。
4. 换能器故障:换能器是超声波清洗机的核心部件,其故障可能导致整个设备无法正常工作。换能器故障可能表现为工作异常、发热、效率降低等。
二、超声波清洗机故障应对与维修
1. 清洗效果不佳的应对与维修:首先检查清洗液是否合适,温度、浓度等参数是否符合要求。如有问题,及时调整。如清洗液没有问题,可能是由于换能器功率或频率设置不合适,需要重新调整。同时,检查清洗槽是否破裂或松动,如有需要,进行更换或紧固。
2. 机器噪音大的应对与维修:首先观察各部件是否有松动现象,如有需要紧固的部件及时进行紧固。同时,检查风扇是否被异物卡住,如有问题及时清理。如以上都没有问题,可能需要更换换能器或振动板。
3. 无法启动或工作中断的应对与维修:首先检查电源是否正常,如有问题及时更换电源。检查控制电路是否正常工作,如有问题及时更换相应的控制元件。同时,检查保险丝是否熔断,如有问题及时更换合适的保险丝。另外,还需要检查热保护器是否正常工作,如有问题及时更换。
4. 换能器故障的应对与维修:换能器故障可能导致整个设备无法正常工作。如遇到这种故障,首先观察换能器是否有发热现象,如有需要可降低设备的工作频率或功率。如换能器已经发热严重,可能需要更换新的换能器。同时,检查工作液是否合适,如有问题及时调整。还需要检查连接线路是否正常,如有问题及时更换连接线。
三、本文对超声波清洗机常见故障进行了详细的分析,并给出了相应的应对与维修方法。
在实际使用过程中,用户应严格按照使用说明书进行操作和维护,及时发现并解决潜在的问题,以延长超声波清洗机的使用寿命和提高工作效率。当遇到无法解决的问题时,可联系专业的维修人员进行检修和处理。
NAME | COMPONENT | DURATION | 0 ms | 20 ms | 40 ms | 60 ms | 80 ms | 100 ms |
---|---|---|---|---|---|---|---|---|
Bootstrap | Timer | 12.81 ms | ||||||
Routing | Timer | 0.03 ms | ||||||
Controller | Timer | 103.50 ms | ||||||
Controller Constructor | Timer | 11.13 ms | ||||||
Query | Database | 4.56 ms | ||||||
Query | Database | 4.43 ms | ||||||
Query | Database | 4.43 ms | ||||||
Query | Database | 4.29 ms | ||||||
Query | Database | 4.41 ms | ||||||
Query | Database | 4.39 ms | ||||||
Query | Database | 4.40 ms | ||||||
Query | Database | 14.78 ms |
Time | Query String |
---|---|
4.56 ms | SELECT * FROM `dr_1_share_index` WHERE `id` = 451 |
4.43 ms | SELECT * FROM `dr_1_news` WHERE `id` = 451 |
4.43 ms | SELECT * FROM `dr_1_news_data_0` WHERE `id` = 451 |
4.29 ms | SELECT * FROM `dr_1_news_category_data` WHERE `id` = 451 |
4.41 ms | SELECT * FROM `dr_1_news` WHERE `catid` = 8 AND `status` = 9 AND `id` < 451 ORDER BY `id` desc LIMIT 1 |
4.39 ms | SELECT * FROM `dr_1_news` WHERE `catid` = 8 AND `status` = 9 AND `id` > 451 ORDER BY `id` asc LIMIT 1 |
4.4 ms | SHOW COLUMNS FROM `dr_1_news_hits` |
14.78 ms | SELECT `dr_1_news`.*,`dr_1_news_hits`.`hits`,`dr_1_news_hits`.`day_hits`,`dr_1_news_hits`.`week_hits`,`dr_1_news_hits`.`month_hits`,`dr_1_news_hits`.`year_hits`,`dr_1_news_hits`.`day_time`,`dr_1_news_hits`.`week_time`,`dr_1_news_hits`.`month_time`,`dr_1_news_hits`.`year_time` FROM `dr_1_news` LEFT JOIN `dr_1_news_hits` ON `dr_1_news`.`id`=`dr_1_news_hits`.`id` WHERE `dr_1_news`.`status` = 9 AND `dr_1_news`.`catid` = 8 ORDER BY `dr_1_news_hits`.`hits` DESC LIMIT 9 |
模板 | 路径 |
---|---|
show.html | /data/user/htdocs/template/pc/default/home/show.html |
header.html | /data/user/htdocs/template/pc/default/home/header.html |
footer.html | /data/user/htdocs/template/pc/default/home/footer.html |
模板 | 提示 |
---|---|
show.html | 由于模板文件[/data/user/htdocs/template/pc/default/home/news/show.html]不存在,因此本页面引用主目录的模板[/data/user/htdocs/template/pc/default/home/show.html] |
header.html | 由于模板文件[/data/user/htdocs/template/pc/default/home/news/header.html]不存在,因此本页面引用主目录的模板[/data/user/htdocs/template/pc/default/home/header.html] |
footer.html | 由于模板文件[/data/user/htdocs/template/pc/default/home/news/footer.html]不存在,因此本页面引用主目录的模板[/data/user/htdocs/template/pc/default/home/footer.html] |
id | '451' |
catid | '8' |
title | '超声波清洗机常见故障应对与维修的专业解析' |
thumb | '2613' |
keywords | '' |
description | '超声波清洗机是一种利用高频振动波对物体进行清洁的设备。由于其高效、环保、清洁等特点,被广泛应用于各种领域。然而,当超声波清洗机出现故障时,可能会影响正常的生产和工作。本文将详细解析超声波清洗机常见的故障及应对与维修方法。一、超声波清洗机常见故障1.清洗效果不佳:超声波清洗机的清洗效果不佳可能是由多种原因导致的。首先可能是由于清洗液温度过低或过高,清洗时间过短或过长,以及清洗液污染等问题。此外,换能' |
hits | '5' |
uid | '2' |
author | '简耳超声' |
status | '9' |
url | '/index.php?c=show&id=451' |
link_id | '0' |
tableid | '0' |
inputip | '117.155.249.189-6471' |
inputtime | '2023-11-03 14:52:14' |
updatetime | '2023-11-03 14:52:14' |
displayorder | '0' |
content | '<p><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">超声波清洗机是一种利用高频振动波对物体进行清洁的设备。由于其高效、环保、清洁等特点,被广泛应用于各种领域。然而,当超声波清洗机出现故障时,可能会影响正常的生产和工作。本文将详细解析超声波清洗机常见的故障及应对与维修方法。</span></span></p><p><span style="font-family:宋体;color:rgb(255,0,0);font-weight:bold;font-size:19px">一、</span><strong><span style="font-family: Calibri;color: rgb(255, 0, 0);font-size: 19px"><span style="font-family:宋体">超声波清洗机常见故障</span></span></strong></p><p><span style="font-family:Calibri;font-weight:bold;font-size:19px">1. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">清洗效果不佳</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">超声波清洗机的清洗效果不佳可能是由多种原因导致的。首先可能是由于清洗液温度过低或过高,清洗时间过短或过长,以及清洗液污染等问题。此外,换能器功率、频率设置不合适,以及清洗槽振动剧烈等也会导致清洗效果不佳。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:Calibri;font-weight:bold;font-size:19px">2. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">机器噪音大</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">超声波清洗机在工作过程中产生的噪音可能来自于换能器、振动板、风扇等多个部位。当出现这种故障时,需要检查这些部件是否正常工作,有无松动或损坏。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:Calibri;font-weight:bold;font-size:19px">3. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">无法启动或工作中断</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">这种故障可能是由于电源、控制电路、保险丝、热保护器等出现问题导致的。需要检查各个部件是否正常工作,及时更换损坏的部件。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:Calibri;font-weight:bold;font-size:19px">4. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">换能器故障</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">换能器是超声波清洗机的核心部件,其故障可能导致整个设备无法正常工作。换能器故障可能表现为工作异常、发热、效率降低等。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:宋体;color:rgb(255,0,0);font-weight:bold;font-size:19px">二、</span><strong><span style="font-family: Calibri;color: rgb(255, 0, 0);font-size: 19px"><span style="font-family:宋体">超声波清洗机故障应对与维修</span></span></strong></p><p><span style="font-family:Calibri;font-weight:bold;font-size:19px">1. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">清洗效果不佳的应对与维修</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">首先检查清洗液是否合适,温度、浓度等参数是否符合要求。如有问题,及时调整。如清洗液没有问题,可能是由于换能器功率或频率设置不合适,需要重新调整。同时,检查清洗槽是否破裂或松动,如有需要,进行更换或紧固。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:Calibri;font-weight:bold;font-size:19px">2. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">机器噪音大的应对与维修</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">首先观察各部件是否有松动现象,如有需要紧固的部件及时进行紧固。同时,检查风扇是否被异物卡住,如有问题及时清理。如以上都没有问题,可能需要更换换能器或振动板。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:Calibri;font-weight:bold;font-size:19px">3. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">无法启动或工作中断的应对与维修</span></span></strong><span style="font-family: 宋体;font-size: 19px">:</span><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">首先检查电源是否正常,如有问题及时更换电源。检查控制电路是否正常工作,如有问题及时更换相应的控制元件。同时,检查保险丝是否熔断,如有问题及时更换合适的保险丝。另外,还需要检查热保护器是否正常工作,如有问题及时更换。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:Calibri;font-weight:bold;font-size:19px">4. </span><strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">换能器故障的应对与维修</span></span></strong><strong><span style="font-family: 宋体;font-size: 19px">:</span></strong><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">换能器故障可能导致整个设备无法正常工作。如遇到这种故障,首先观察换能器是否有发热现象,如有需要可降低设备的工作频率或功率。如换能器已经发热严重,可能需要更换新的换能器。同时,检查工作液是否合适,如有问题及时调整。还需要检查连接线路是否正常,如有问题及时更换连接线。</span></span></p><p style="margin-left:0;text-indent:0"><span style="font-family:宋体;color:rgb(255,0,0);font-weight:bold;font-size:19px">三、</span><strong><span style="font-family: Calibri;color: rgb(255, 0, 0);font-size: 19px"><span style="font-family:宋体">本文对超声波清洗机常见故障进行了详细的分析,并给出了相应的应对与维修方法。</span></span></strong></p><p><span style="font-family: Calibri;font-size: 19px"><span style="font-family:宋体">在实际使用过程中,用户应严格按照使用说明书进行操作和维护,及时发现并解决潜在的问题,以延长超声波清洗机的使用寿命和提高工作效率。当遇到无法解决的问题时,可联系专业的维修人员进行检修和处理。</span></span></p><p style="text-align: center;"><img src="https://www.tullker.com/uploadfile/ueditor/image/202311/1698994390c85534.jpg" title="15" alt="15"/></p>' |
tag | '' |
kws | array ( ) |
tags | array ( ) |
prev_page | array ( 'id' => '450', 'catid' => '8', 'title' => '超声波清洗机在光学元件制造中的应用案例与探讨', 'thumb' => '2611', 'keywords' => '', 'description' => '一、超声波清洗是一种高效、高质量的清洗方法,适用于各种表面复杂的物体。在光学元件制造中,超声波清洗机对于清洁光学元件表面具有重要作用。本文将通过实际应用案例探讨超声波清洗机在光学元件制造中的应用。二、超声波清洗原理超声波清洗机利用高频振动能量传播到液体中,产生强大的冲击波,这种冲击波可以将物体表面的污垢、油脂、杂质等迅速剥离,从而达到清洁的目的。相比其他清洗方式,超声波清洗具有更高的清洗效率和更好', 'hits' => '9', 'uid' => '2', 'author' => '简耳超声', 'status' => '9', 'url' => 'https://www.tullker.com/index.php?c=show&id=450', 'link_id' => '0', 'tableid' => '0', 'inputip' => '117.155.249.189-6651', 'inputtime' => '1698993976', 'updatetime' => '1698993976', 'displayorder' => '0', ) |
next_page | array ( 'id' => '452', 'catid' => '8', 'title' => '超声波清洗机在半导体制造领域的成功案例与未来前景', 'thumb' => '2615', 'keywords' => '', 'description' => '超声波清洗机的优点在于其能够以非破坏性的方式移除污染物,同时不会对半导体器件的精细结构造成影响。下面将介绍一些超声波清洗机在半导体制造领域的成功应用案例以及未来的发展前景。一、成功案例1.清洗硅片:在半导体制造过程中,硅片的表面清洁度对于产品的质量和稳定性具有重要影响。超声波清洗机能够有效地去除硅片表面的颗粒、有机物、金属离子等污染物,提高硅片的洁净度。例如,某知名半导体制造企业采用超声波清洗机来', 'hits' => '6', 'uid' => '2', 'author' => '简耳超声', 'status' => '9', 'url' => 'https://www.tullker.com/index.php?c=show&id=452', 'link_id' => '0', 'tableid' => '0', 'inputip' => '117.155.249.189-6238', 'inputtime' => '1698994662', 'updatetime' => '1698994662', 'displayorder' => '0', ) |
_inputtime | '1698994334' |
_updatetime | '1698994334' |
meta_title | '超声波清洗机常见故障应对与维修的专业解析_行业新闻_新闻中心_简耳超声,超声波清洗机 ,超声波清洗机工业 ,全自动超声波清洗机' |
meta_keywords | '' |
meta_description | '超声波清洗机是一种利用高频振动波对物体进行清洁的设备。由于其高效、环保、清洁等特点,被广泛应用于各种领域。然而,当超声波清洗机出现故障时,可能会影响正常的生产和工作。本文将详细解析超声波清洗机常见的故障及应对与维修方法。一、超声波清洗机常见故障1.清洗效果不佳:超声波清洗机的清洗效果不佳可能是由多种原因导致的。首先可能是由于清洗液温度过低或过高,清洗时间过短或过长,以及清洗液污染等问题。此外,换能' |
cat | array ( 'id' => '8', 'tid' => '1', 'pid' => '1', 'mid' => 'news', 'pids' => '0,1', 'name' => '行业新闻', 'dirname' => 'hynews', 'pdirname' => 'xwdt/', 'child' => 0, 'childids' => 8, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '[第{page}页{join}]{name}{join}{modname}{join}{SITE_NAME}', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '20', 'mpagesize' => '0', 'page' => '', 'list' => 'list.html', 'category' => 'category.html', 'search' => 'search.html', 'show' => 'show.html', ), 'cat_field' => NULL, 'module_field' => NULL, 'html' => 0, ), 'displayorder' => '0', 'chanpinduotu' => array ( ), 'spjssc' => NULL, 'qywhzs' => array ( ), 'sjbsp' => '', 'pcatpost' => 0, 'topid' => '1', 'catids' => array ( 0 => '8', ), 'is_post' => 1, 'url' => '/index.php?c=category&id=8', 'total' => '-', 'field' => array ( ), '_chanpinduotu' => NULL, '_qywhzs' => NULL, '_sjbsp' => NULL, ) |
top | array ( 'id' => '1', 'tid' => '1', 'pid' => '0', 'mid' => 'news', 'pids' => '0', 'name' => '新闻中心', 'dirname' => 'xwdt', 'pdirname' => '', 'child' => 1, 'childids' => '1,7,8', 'domain' => '', 'mobile_domain' => '', 'thumb' => '1297', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '[第{page}页{join}]{catpname}{join}{modname}{join}{SITE_NAME}', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list.html', 'category' => 'category.html', 'search' => 'search.html', 'show' => 'show.html', ), 'cat_field' => NULL, 'module_field' => NULL, 'html' => 0, ), 'displayorder' => '0', 'chanpinduotu' => array ( ), 'spjssc' => '', 'qywhzs' => array ( ), 'sjbsp' => '', 'pcatpost' => 0, 'topid' => '1', 'catids' => array ( 0 => '1', 1 => '7', 2 => '8', ), 'is_post' => 0, 'url' => '/index.php?c=category&id=1', 'total' => '-', 'field' => array ( ), '_chanpinduotu' => '', '_qywhzs' => '', ) |
pageid | 1 |
params | array ( 'catid' => '8', ) |
parent | array ( 'id' => '1', 'tid' => '1', 'pid' => '0', 'mid' => 'news', 'pids' => '0', 'name' => '新闻中心', 'dirname' => 'xwdt', 'pdirname' => '', 'child' => 1, 'childids' => '1,7,8', 'domain' => '', 'mobile_domain' => '', 'thumb' => '1297', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '[第{page}页{join}]{catpname}{join}{modname}{join}{SITE_NAME}', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '10', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'list.html', 'category' => 'category.html', 'search' => 'search.html', 'show' => 'show.html', ), 'cat_field' => NULL, 'module_field' => NULL, 'html' => 0, ), 'displayorder' => '0', 'chanpinduotu' => array ( ), 'spjssc' => '', 'qywhzs' => array ( ), 'sjbsp' => '', 'pcatpost' => 0, 'topid' => '1', 'catids' => array ( 0 => '1', 1 => '7', 2 => '8', ), 'is_post' => 0, 'url' => 'https://www.tullker.com/index.php?c=category&id=1', 'total' => '-', 'field' => array ( ), '_chanpinduotu' => '', '_qywhzs' => '', ) |
markid | 'module-news-8' |
related | array ( 7 => array ( 'id' => '7', 'tid' => '1', 'pid' => '1', 'mid' => 'news', 'pids' => '0,1', 'name' => '展会动态', 'dirname' => 'zhdt', 'pdirname' => 'xwdt/', 'child' => 0, 'childids' => 7, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '[第{page}页{join}]{name}{join}{modname}{join}{SITE_NAME}', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '20', 'mpagesize' => '0', 'page' => '', 'list' => 'list.html', 'category' => 'category.html', 'search' => 'search.html', 'show' => 'show.html', ), 'cat_field' => NULL, 'module_field' => NULL, 'html' => 0, ), 'displayorder' => '0', 'chanpinduotu' => array ( ), 'spjssc' => NULL, 'qywhzs' => array ( ), 'sjbsp' => '', 'pcatpost' => 0, 'topid' => '1', 'catids' => array ( 0 => '7', ), 'is_post' => 1, 'url' => 'https://www.tullker.com/index.php?c=category&id=7', 'total' => '-', 'field' => array ( ), '_chanpinduotu' => '', '_qywhzs' => NULL, '_sjbsp' => NULL, ), 8 => array ( 'id' => '8', 'tid' => '1', 'pid' => '1', 'mid' => 'news', 'pids' => '0,1', 'name' => '行业新闻', 'dirname' => 'hynews', 'pdirname' => 'xwdt/', 'child' => 0, 'childids' => 8, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '[第{page}页{join}]{name}{join}{modname}{join}{SITE_NAME}', 'list_keywords' => '', 'list_description' => '', ), 'template' => array ( 'pagesize' => '20', 'mpagesize' => '0', 'page' => '', 'list' => 'list.html', 'category' => 'category.html', 'search' => 'search.html', 'show' => 'show.html', ), 'cat_field' => NULL, 'module_field' => NULL, 'html' => 0, ), 'displayorder' => '0', 'chanpinduotu' => array ( ), 'spjssc' => NULL, 'qywhzs' => array ( ), 'sjbsp' => '', 'pcatpost' => 0, 'topid' => '1', 'catids' => array ( 0 => '8', ), 'is_post' => 1, 'url' => 'https://www.tullker.com/index.php?c=category&id=8', 'total' => '-', 'field' => array ( ), '_chanpinduotu' => NULL, '_qywhzs' => NULL, '_sjbsp' => NULL, ), ) |
urlrule | '/index.php?c=show&id=451&page=[page]' |
fix_html_now_url | '' |
my_web_url | 'https://tullker.com/index.php?c=show&id=451' |
get | array ( 'c' => 'show', 'id' => '451', ) |
App.php | APPPATH/Config/App.php |
Autoload.php | APPPATH/Config/Autoload.php |
Cache.php | APPPATH/Config/Cache.php |
Cache.php | APPPATH/Library/Cache.php |
CodeIgniter.php | APPPATH/Extend/CodeIgniter.php |
Constants.php | APPPATH/Config/Constants.php |
Content.php | APPPATH/Model/Content.php |
ContentSecurityPolicy.php | APPPATH/Config/ContentSecurityPolicy.php |
Cookie.php | APPPATH/Config/Cookie.php |
Database.php | APPPATH/Config/Database.php |
Date.php | APPPATH/Field/Date.php |
Exceptions.php | APPPATH/Config/Exceptions.php |
Exceptions.php | APPPATH/Extend/Exceptions.php |
Field.php | APPPATH/Library/Field.php |
File.php | APPPATH/Field/File.php |
Filters.php | APPPATH/Config/Filters.php |
Helper.php | APPPATH/Core/Helper.php |
Hooks.php | APPPATH/Core/Hooks.php |
Init.php | APPPATH/Init.php |
Input.php | APPPATH/Library/Input.php |
Kint.php | APPPATH/Config/Kint.php |
Lang.php | APPPATH/Library/Lang.php |
Logger.php | APPPATH/Config/Logger.php |
Member.php | APPPATH/Model/Member.php |
Model.php | APPPATH/Core/Model.php |
Module.php | APPPATH/Extend/Home/Module.php |
Modules.php | APPPATH/Config/Modules.php |
Paths.php | APPPATH/Config/Paths.php |
Phpcmf.php | APPPATH/Core/Phpcmf.php |
Request.php | APPPATH/Extend/Request.php |
Router.php | APPPATH/Library/Router.php |
Routes.php | APPPATH/Config/Routes.php |
Security.php | APPPATH/Library/Security.php |
Seo.php | APPPATH/Library/Seo.php |
Service.php | APPPATH/Core/Service.php |
Services.php | APPPATH/Config/Services.php |
Show.php | APPPATH/Control/Show.php |
Text.php | APPPATH/Field/Text.php |
Textarea.php | APPPATH/Field/Textarea.php |
Toolbar.php | APPPATH/Config/Toolbar.php |
Ueditor.php | APPPATH/Field/Ueditor.php |
UserAgents.php | APPPATH/Config/UserAgents.php |
Version.php | FCPATH/My/Config/Version.php |
View.php | APPPATH/Config/View.php |
View.php | APPPATH/Core/View.php |
View.php | APPPATH/Extend/View.php |
custom.php | /data/user/htdocs/config/custom.php |
database.php | /data/user/htdocs/config/database.php |
domain_app.php | /data/user/htdocs/cache/config/domain_app.php |
domain_client.php | /data/user/htdocs/cache/config/domain_client.php |
hooks.php | /data/user/htdocs/config/hooks.php |
index.php | /data/user/htdocs/index.php |
lang.php | /data/user/htdocs/api/language/zh-cn/lang.php |
site.php | /data/user/htdocs/cache/config/site.php |
system.php | /data/user/htdocs/cache/config/system.php |
template_pc_default_home_footer.html.cache.php | /data/user/htdocs/cache/template/template_pc_default_home_footer.html.cache.php |
template_pc_default_home_header.html.cache.php | /data/user/htdocs/cache/template/template_pc_default_home_header.html.cache.php |
template_pc_default_home_show.html.cache.php | /data/user/htdocs/cache/template/template_pc_default_home_show.html.cache.php |
AutoloadConfig.php | SYSTEMPATH/Config/AutoloadConfig.php |
Autoloader.php | SYSTEMPATH/Autoloader/Autoloader.php |
BaseBuilder.php | SYSTEMPATH/Database/BaseBuilder.php |
BaseCollector.php | SYSTEMPATH/Debug/Toolbar/Collectors/BaseCollector.php |
BaseConfig.php | SYSTEMPATH/Config/BaseConfig.php |
BaseConnection.php | SYSTEMPATH/Database/BaseConnection.php |
BaseHandler.php | SYSTEMPATH/Cache/Handlers/BaseHandler.php |
BaseResult.php | SYSTEMPATH/Database/BaseResult.php |
BaseService.php | SYSTEMPATH/Config/BaseService.php |
Builder.php | SYSTEMPATH/Database/MySQLi/Builder.php |
CacheFactory.php | SYSTEMPATH/Cache/CacheFactory.php |
CacheInterface.php | SYSTEMPATH/Cache/CacheInterface.php |
CliRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/CliRenderer.php |
CloneableCookieInterface.php | SYSTEMPATH/Cookie/CloneableCookieInterface.php |
CodeIgniter.php | SYSTEMPATH/CodeIgniter.php |
Common.php | SYSTEMPATH/Common.php |
Config.php | SYSTEMPATH/Config/Config.php |
Config.php | SYSTEMPATH/Database/Config.php |
Connection.php | SYSTEMPATH/Database/MySQLi/Connection.php |
ConnectionInterface.php | SYSTEMPATH/Database/ConnectionInterface.php |
ContentSecurityPolicy.php | SYSTEMPATH/HTTP/ContentSecurityPolicy.php |
Controller.php | SYSTEMPATH/Controller.php |
Cookie.php | SYSTEMPATH/Cookie/Cookie.php |
CookieInterface.php | SYSTEMPATH/Cookie/CookieInterface.php |
CookieStore.php | SYSTEMPATH/Cookie/CookieStore.php |
Database.php | SYSTEMPATH/Database/Database.php |
Database.php | SYSTEMPATH/Debug/Toolbar/Collectors/Database.php |
DebugToolbar.php | SYSTEMPATH/Filters/DebugToolbar.php |
DotEnv.php | SYSTEMPATH/Config/DotEnv.php |
Escaper.php | SYSTEMPATH/ThirdParty/Escaper/Escaper.php |
Events.php | SYSTEMPATH/Debug/Toolbar/Collectors/Events.php |
Events.php | SYSTEMPATH/Events/Events.php |
Exceptions.php | SYSTEMPATH/Debug/Exceptions.php |
Factories.php | SYSTEMPATH/Config/Factories.php |
Factory.php | SYSTEMPATH/Config/Factory.php |
FileHandler.php | SYSTEMPATH/Cache/Handlers/FileHandler.php |
FileLocator.php | SYSTEMPATH/Autoloader/FileLocator.php |
Files.php | SYSTEMPATH/Debug/Toolbar/Collectors/Files.php |
FilterInterface.php | SYSTEMPATH/Filters/FilterInterface.php |
Filters.php | SYSTEMPATH/Filters/Filters.php |
Header.php | SYSTEMPATH/HTTP/Header.php |
IncomingRequest.php | SYSTEMPATH/HTTP/IncomingRequest.php |
Kint.php | SYSTEMPATH/ThirdParty/Kint/Kint.php |
Logger.php | SYSTEMPATH/Log/Logger.php |
LoggerInterface.php | SYSTEMPATH/ThirdParty/PSR/Log/LoggerInterface.php |
Logs.php | SYSTEMPATH/Debug/Toolbar/Collectors/Logs.php |
Message.php | SYSTEMPATH/HTTP/Message.php |
MessageInterface.php | SYSTEMPATH/HTTP/MessageInterface.php |
MessageTrait.php | SYSTEMPATH/HTTP/MessageTrait.php |
Modules.php | SYSTEMPATH/Modules/Modules.php |
Query.php | SYSTEMPATH/Database/Query.php |
QueryInterface.php | SYSTEMPATH/Database/QueryInterface.php |
Renderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/Renderer.php |
RendererInterface.php | SYSTEMPATH/View/RendererInterface.php |
Request.php | SYSTEMPATH/HTTP/Request.php |
RequestInterface.php | SYSTEMPATH/HTTP/RequestInterface.php |
RequestTrait.php | SYSTEMPATH/HTTP/RequestTrait.php |
Response.php | SYSTEMPATH/HTTP/Response.php |
ResponseInterface.php | SYSTEMPATH/HTTP/ResponseInterface.php |
ResponseTrait.php | SYSTEMPATH/API/ResponseTrait.php |
ResponseTrait.php | SYSTEMPATH/HTTP/ResponseTrait.php |
Result.php | SYSTEMPATH/Database/MySQLi/Result.php |
ResultInterface.php | SYSTEMPATH/Database/ResultInterface.php |
RichRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/RichRenderer.php |
RouteCollection.php | SYSTEMPATH/Router/RouteCollection.php |
RouteCollectionInterface.php | SYSTEMPATH/Router/RouteCollectionInterface.php |
Router.php | SYSTEMPATH/Router/Router.php |
RouterInterface.php | SYSTEMPATH/Router/RouterInterface.php |
Routes.php | SYSTEMPATH/Config/Routes.php |
Routes.php | SYSTEMPATH/Debug/Toolbar/Collectors/Routes.php |
Services.php | SYSTEMPATH/Config/Services.php |
TextRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/TextRenderer.php |
Timer.php | SYSTEMPATH/Debug/Timer.php |
Timers.php | SYSTEMPATH/Debug/Toolbar/Collectors/Timers.php |
Toolbar.php | SYSTEMPATH/Debug/Toolbar.php |
URI.php | SYSTEMPATH/HTTP/URI.php |
UserAgent.php | SYSTEMPATH/HTTP/UserAgent.php |
Utils.php | SYSTEMPATH/ThirdParty/Kint/Utils.php |
View.php | SYSTEMPATH/Config/View.php |
View.php | SYSTEMPATH/View/View.php |
Views.php | SYSTEMPATH/Debug/Toolbar/Collectors/Views.php |
init.php | SYSTEMPATH/ThirdParty/Kint/init.php |
init_helpers.php | SYSTEMPATH/ThirdParty/Kint/init_helpers.php |
url_helper.php | SYSTEMPATH/Helpers/url_helper.php |
Directory: | |
Controller: | \Phpcmf\Control\Show |
Method: | index |
Params: | 0 / 0 |
Method | Route | Handler |
---|---|---|
GET | / | \Phpcmf\Control\Show::index |
HEAD | / | \Phpcmf\Control\Show::index |
POST | / | \Phpcmf\Control\Show::index |
PUT | / | \Phpcmf\Control\Show::index |
DELETE | / | \Phpcmf\Control\Show::index |
OPTIONS | / | \Phpcmf\Control\Show::index |
TRACE | / | \Phpcmf\Control\Show::index |
CONNECT | / | \Phpcmf\Control\Show::index |
CLI | migrations/([^/]+)/([^/]+) | \CodeIgniter\Commands\MigrationsCommand::$1/$2 |
CLI | migrations/([^/]+) | \CodeIgniter\Commands\MigrationsCommand::$1 |
CLI | migrations | \CodeIgniter\Commands\MigrationsCommand::index |
CLI | ci(.*) | \CodeIgniter\CLI\CommandRunner::index/$1 |
CLI | / | \Phpcmf\Control\Show::index |
Time | Event Name | Times Called |
---|---|---|
7.91 ms | pre_system | 1 |
0.09 ms | dbquery | 8 |
Action | Datetime | Status | Method | URL | Content-Type | Is AJAX? |
---|---|---|---|---|---|---|
2025-04-03 10:47:46 | 200 | GET | https://tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:43:57 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:38:05 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:37:01 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:36:20 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:31:41 | 200 | GET | https://tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:31:37 | 200 | GET | https://tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:30:38 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:29:52 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:28:07 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:27:51 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:27:48 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:27:44 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:27:40 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:27:30 | 200 | GET | https://tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:23:49 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:23:10 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:17:21 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:17:12 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No | |
2025-04-03 10:15:21 | 200 | GET | https://www.tullker.com/index.php/ | text/html; charset=UTF-8 | No |
Session doesn't seem to be active.
c | show |
id | 451 |
Accept-Encoding | gzip, deflate, br, zstd |
Sec-Fetch-Dest | document |
Sec-Fetch-User | ?1 |
Sec-Fetch-Mode | navigate |
Sec-Fetch-Site | none |
Accept | text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7 |
User-Agent | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) |
Upgrade-Insecure-Requests | 1 |
Sec-Ch-Ua-Platform | "Windows" |
Sec-Ch-Ua-Mobile | ?0 |
Sec-Ch-Ua | "HeadlessChrome";v="129", "Not=A?Brand";v="8", "Chromium";v="129" |
Cache-Control | no-cache |
Pragma | no-cache |
Connection | keep-alive |
Host | tullker.com |
Accept-Encoding | gzip, deflate, br, zstd |
Sec-Fetch-Dest | document |
Sec-Fetch-User | ?1 |
Sec-Fetch-Mode | navigate |
Sec-Fetch-Site | none |
Accept | text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7 |
User-Agent | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) |
Upgrade-Insecure-Requests | 1 |
Sec-Ch-Ua-Platform | "Windows" |
Sec-Ch-Ua-Mobile | ?0 |
Sec-Ch-Ua | "HeadlessChrome";v="129", "Not=A?Brand";v="8", "Chromium";v="129" |
Cache-Control | no-cache |
Pragma | no-cache |
Connection | keep-alive |
Host | tullker.com |
CodeIgniter Version: | 4.1.4 |
PHP Version: | 7.4.16 |
PHP SAPI: | fpm-fcgi |
Environment: | development |
Base URL: | https://tullker.com/ |
Timezone: | PRC |
Locale: | en |
Content Security Policy Enabled: | No |